Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Brakes/Levers/Pads

TRP Spyke
$99.99
Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel
TRP Spyre
$79.99
The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
SwissStop Catalyst One 6 Bolt
$40.99
- Optimum heat dissipation - High durability - Wear indicators - 1.95mm thick - Rounded edge - UCI approved - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Material: Steel
Shimano Alivio V-Brake
$16.99
• 107mm arch for better clearance with mud guard • Updated rubber boots secure attachment to lead pipe • Strong braking power with excellent braking control • Cartridge shoe holder • Color options: Black, Silver
Shimano Altus BR-CT91 Cantilever Brake with Link Wire
$14.99
Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g
Shimano Deore BR-MT520/BL-MT501 Disc Brake and Lever
$144.99
Shimano Deore hydraulic disc brakes are a solid setup, offering reliable power and rigid brake design for all riding styles, from XC to trail. The BL-MT500 brake levers deliver high-powered Servo Wave performance for rapid initial pad contact, along with I-spec II compatibility. These are paired with powerful 4-piston MT520 calipers that help boost rider confidence and enjoyment. - Highly responsive braking power for greater control and modulation - Sleek and durable master cylinder design - 4-piston calipers provide a wider pad contact area - Heat insulated pads and pistons
Shimano GRX RX812 Hydraulic Sub Brake Lever
$68.99
The Shimano GRX BL-RX812 in-line brake lever delivers greater rider control for mixed-terrain riding thanks to Shimano's category-leading hydraulic disc brakes. The hydraulic disc sub brake lever offers reliable and accessible braking in more positions and allows for quick access while riding upright on the tops of the handlebar. - Quickly brake when riding upright - More confident and accessible braking from multiple positions - Less fatigue on long tours
Shimano LX/DX M70T3 V-Brake Shoe Set
$14.99
Shimano Mountain brake shoe sets - Mounting hardware included - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: One Piece - Rim Compatibility: Standard
Shimano M70R2 Severe Condition V-Brake Pads Pair
$6.00
Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions
SRAM CenterLine XR 6-Bolt 2-Piece Rotor
$82.00
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight - Includes stainless steel rotor bolts
SRAM Level T Disc Brake
$92.00
Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.
SRAM Road Disc Organic Brake Pads
$26.00 - $33.00
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader
Origin8 Cross Top-Mount Levers
$42.49
Compatible with caliper and cantilever brakes - Forged aluminum lever and body - Ergonomic 2-finger lever design - Return spring with reach and cable tension adjust - Hinged clamp allows installation without removing grips/tape - Fits 1.5-1.6mm brake cable type - 90g pair
Origin8 Fork-Mount Brake Cable Hanger
$15.29
Alleviate brake cable alignment and tangles with Origin-8's Fork Mount Cable Hanger. Made from forged aluminum, it mounts easily to the hole in your bike's fork crown. • Forged aluminum construction • Mounts to most frame or fork mounting holes • Great for tricky cantilever brake setups • Lightweight design • Front for fork mount / Rear for frame mount
Origin8 Vise II FM Mechanical Disc Brake
$118.99
- Cable-actuated flat-mount mechanical disc-brake caliper - "Plug and Play" dual piston caliper for improved braking performance over single-piston designs - Dual-piston brake-pad actuation prevents rotor deformation - Compatible with both 140mm and 160mm front and rear rotors - Fully adjustable design featuring pad in/out fine-tuning - Includes mounting hardware and FM adapter - Uses Origin8 disc brake pad models 120563/120564/120565
Origin8 Vise Road Carbon Rim Cartridge Inserts
$14.99 - $17.99
- 55mm brake pad inserts for Origin8 Vise road cartridge brake pads - Advanced carbon rim braking compound provides superior performance in both dry and wet conditions - Automatic toe-in alignment
Odyssey 1999 Caliper Brake and Lever Set
$17.99
The 1999 brake kit is a lightweight alloy brake kit perfect for those rebuilding that old BMX bike they found at a garage sale. This kit includes a brake cable, universal brake caliper, front and rear pivot bolts, alloy brake lever and all necessary hardware. Features - Side pull style brake - Works with front or Rear - Includes brake, lever, and cable - 13.8 oz
Magura 9.P Disc Brake Pads
$34.99
9 Series Disc Brake Pads - One piece connected back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Pair of disc brake pads for one MT5, MT7 caliper
Magura Disc Brake Adapters
$15.40
- Disc brake adapters for Magura 74mm disc brake calipers - IS: 51mm International Standard, PM: 74mm Post Mount
Magura MT Sport Master Cylinder Assemblies
$59.56
Magura mt sport disc brake master cylinder assembly 2-finger carbotecture lever black Master cylinder assemblies for Magura brakes include a master cylinder, blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side. - Carbotecture radial master - Flip-flop lever design works on right or left side with either brake - Easy bleed design - Carbotecture handlebar clamp - 2-Finger Carbotecture lever blade - Adjustable lever reach
Kool-Stop Alloy Disc Pads (Avid/SRAM)
$18.99 - $23.10
- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate
Kool-Stop Steel Disc Pads (Hayes)
$17.00 - $18.50
- High performance compounds recommended for all-conditions - Steel backing
Kool-Stop Steel Disc Pads (Tektro)
$17.00 - $19.99
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel
Formula Caliper Adapters
$14.99
- Works with all Formula 74mm post mount brake calipers - IS: 51mm (International Standard) tab mount - PM: 74mm post mount
DT Swiss BXP Flash Pro Brake Pads for PR1400 OXiC Wheels
$27.60
High performance compound for alloy wheels improves power and modulation and has excellent stopping power when it's wet out. - Brake pad inserts are made by Swiss Stop - Flash Pro BXP pads fit Shimano and SRAM road caliper brakes
Cane Creek Cross Top Brake Levers
$35.99
Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.
Avid BB5 Road Mechanical Disc Brake
$49.99
Perfect for your road, touring or cross bike, Avid's BB5 Road brakes have all the power you need. Used with your road-style levers, they sport precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.
Avid Disc Brake Pads (Juicy/BB7/BB5)
$19.00 - $26.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Zipp Centerlock Lockring
$19.00
Zipp Center Lock Lockring for 140mm to 160mm
Zipp Tangente Cork Brake Pads
$43.00
Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.
Page 1 of 24 Next page