Skip to main content

Professional Services


Our service process was engineered to be a custom experience for each bike that comes into our shop. Sometimes, labor packages or "Tune ups" work out, but most of the time, they either do too little or too much for a bike. This is why we utilize a quote system similar to your favorite auto dealer.

- Step One: Bring the bike in to our shop. 

- Step Two: We gather your contact information and any notes you have about your bike. (You can either take off or stick around for step three.) 

- Step Three: We go through your bike and write up a detailed line-item quote for everything it needs.

- Step Four: Your bike service is completed on or before a previously agreed upon due date. 

- Step Five: You ride away on your freshly serviced bicycle!

Estimates are always free so don't hesitate to stop by even if you don't think anything is wrong. It's better to get your bike checked on every couple months than to wait until you have a problem. 

Walk-ins are encouraged if you need a quick fix but larger repairs will have to be scheduled. If you need immediate or rushed service to be ready for that big ride or event, please ask, and we'll do our best to fit you in (Express service charge may apply).


Below we've complied a list of the most popular services that we provide, their descriptions, and their prices. 

Drivetrain Clean


$30

- Chain, cassette, and crankset are removed from the bike. 

- The parts are soaked and thoroughly cleaned in our Smart Washer®

- The parts are re-installed on the bike and lubed appropriately. 

- Installation of new chain, cassette, chainrings, or crank arms is included. (Cost of parts not included)

Drivetrain Clean with Derailleurs

$65

- Chain, cassette, crankset, front derailleur, and rear derailleur are removed from the bike.  

- The parts are soaked and thoroughly cleaned in our Smart Washer®.

- The parts are re-installed on the bike and lubed appropriately. 

- The derailleur hanger is straightened. 

- Front and rear derailleurs are adjusted from scratch. 

- Installation of new chain, cassette, chainrings, or crank arms is included. (Cost of parts not included)

Tune and Clean


$150

- Chain, cassette, crankset, front derailleur, rear derailleur, and bottom bracket are removed from the bike. 

- Drivetrain parts are soaked and thoroughly cleaned in our Smart Washer®.

- Bottom bracket shell is thoroughly cleaned and purged of rust and old grease. 

- The frame is thoroughly cleaned and polished. 

- Front and rear wheels are trued and checked for proper tension

- Any new parts are installed on the bike. The labor to install new parts is included with the price. (Costs of parts not included)

- Drivetrain parts are re-installed on the bike and lubed properly. Derailleur hanger is straightened. 

- All components on the bike are adjusted from scratch. 


- Tire/Tube installation

$10   -  Includes labor to install one tire or tube. Flat diagnosis included. (Parts extra, air is always free)

Quick Derailleur Adjustment

$10   -  Cable tension adjusted, chain cleaned and lubed.

Full Derailleur Adjustment

$20   -  Hanger straightened, limits set, cable tension adjusted, chain cleaned & lubed.

Quick Brake Adjustment

$10   -  Brake arms/calipers straightened, cable tension adjusted, pads aligned.

Full Brake Adjustment

$15   -  Same as quick adjustment but new pad install is included. (Parts extra)

Brake Bleed

$20   -  Old fluid flushed from system, pistons cleaned and lubed.

Bike Detail

$30   -  A thorough cleaning of the frame and wheels only.

Tubeless Sealant Refill

$7     -  New Orange Seal installed in tire. (Per wheel, includes sealant)

Tubeless Tape Install

$15   -  Rim cleaned, new tubeless tape installed. (Per wheel, includes tape)

Handlebar Tape Install

$15   -  Old tape removed, handlebars cleaned, new tape installed. (Tape Extra)

In-Line Brake Lever Install

$40   -  Levers installed, new cables and housing installed, tape re-wrapped. (Parts extra)

Pack bike to ship

$60   -  Bike is completely wrapped and secured. All voids in box filled. (Shipping extra)

- Custom Wheel Build

$65   -  Entire wheel building process included. (Parts extra. 30 day free tension check)

- Pro Build

$200 - Bike is built and adjusted completely from the bare frame. (Parts Extra)


In-Store Clinics and Workshops: Coming Soon!


Join our experienced mechanics for classes and workshops to learn basic maintenance, or geek out on more involved services like suspension rebuilds or wheel building.