Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$129.00
- Shift buttons mounted to the end of a bar plug
- Included wire connects to Blip Box
- Fits bars with 19 - 20.5mm inside diameter
$118.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls
$49.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap
$17.00
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap
$22.00
External Blip mount for aero extensions and base bars
- 360 degree rotation for adjustment
- Aero use only to fit 22.2mm OD bar 65mm in length
- Fits all Zipp aero extensions and base bars
- Blips not included
- Weight: 57 grams for pair (does not include Blip)
- Material: Polypropylene + TPE
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap
$39.99
This mount integrates with your Quick-Release Aerobars by attaching directly to one of the aerobar handlebar clamps and provides and out-front section of bar for attaching computers or other accessories.
Benefits:
- Positions your computer for easy viewing in road or aero riding positions
- Stays attached to your bicycle when aerobars are removed
Details:
- Provides two mounting heights and 3 positions to fine tune your computer's position
- Integrates with the optional Water Bottle Mount, putting all your essentials at your fingertips
- Includes all necessary mounting hardware
$354.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style.
ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain.
With ShockWiz, you know exactly how your suspension is performing – and how to make it better.
Features & Benefits:
- Automated tuning recommendations
- Shock tuning score - a snapshot of how well your suspension is set up for you
- Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill.
- Inexpensive, replaceable CR2032 battery lasts for months
- Waterproof and dustproof - IP67 rating
- Two alternative hoses (included) offer a range of fitting options
- Smartphone app is compatible with Apple and Android phones
Essential Details:
- ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use.
- You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive.
- Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app.
- In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
$408.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. Lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style.
ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed and terrain.
With ShockWiz, you know exactly how your suspension is performing – and how to make it better.
The Direct Mount version is for inverted forks such as the RockShox RS-1.
Features & Benefits:
- Automated tuning recommendations.
- Shock tuning score - a snapshot of how well your suspension is set up for you.
- Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill.
- Inexpensive, replaceable CR2032 battery lasts for months.
- Waterproof and dustproof - IP67 rating.
- Two alternative hoses (included) offer a range of fitting options.
- Smartphone app is compatible with Apple and Android phones.
Essential Details:
- ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use.
- You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive.
- Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app.
- In the box: ShockWiz hardware, two hoses, adapter for conventional forks and rear shocks, rubber mounting boot and zip ties.
$38.00
Spare parts for Quarq's ShockWiz automated suspension tuning device.
- Contains a rubber mounting boot, four zip ties, plastic cap and two o-rings.
$82.00
Spare hose kit for Quarq's ShockWiz automated suspension tuning device.
- Contains one of each hose type and four zip ties.
$12.00
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$12.00
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$7.49
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments.
- Lightweight alloy headset spacer with nylon body (9g)
- Compatible only with Shimano Di2 Junction Box
- 95mm length, 44mm width, 6mm height
- 6 Degree angle
$13.99
Wire harness and hardware to measure computer data based on the rear wheel
- Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties
- Bracket fits most bars (25.4 to 31.8mm)
- Compatible with: Protegé 5.0, 8.0 and 9.0
- Ideal for rear wheel indoor bicycle trainers
$9.59
Replace your worn or damaged wiring on Origin8 wired computers (97517 / 97570)
- Includes bracket with (155cm) wired sensor, screw magnet and 4 cable ties
- Includes: Wiring Kit
- Compatibility: Data Station 8 / 10
** HEAD mount is HANDLEBAR mount only (not stem)
$37.99
• Handlebar mount for Garmin Edge 200, 500, and 800
• Fits handlebars 22.2 to 31.8mm (Shims included)
• Forged and CNC`d alloy construction
$37.99
- CNC machined AL6061 alloy GoPro mount for handlebars or seatposts
- Accepts GoPro mounting style compatible accessories
- GoPro mount rotates 90° for ideal positioning of accessories
- Fits 22.2mm, 25.4mm, and 31.8mm handlebars with included adapter
- Fits 27.2mm, 30.9mm, and 31.6mm seatposts with included adapter
$37.99
- CNC machined AL6061 alloy Garmin stem mount
- Mounts to a stem`s faceplate by means of two included M5 x 18mm stem bolts
- Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000
$48.99
- CNC machined AL6061 alloy Garmin/GoPro stem mount
- Mounts to a stem's faceplate by means of two included M5 x 18mm stem bolts
- Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000
- Accepts GoPro mounting style compatible accessories
$29.99
- Lightweight nylon fiber Garmin handlebar mount with 90-degree rotating mounting plate
- Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, and 1000
- Out-front mounting position centers the computer in front of the stem
- Fits both 25.4mm and 31.8mm handlebars with included adapter
$37.99
- Lightweight nylon fiber Garmin handlebar mount with CNC machined AL6061 alloy GoPro mount
- Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, and 1000
- Accepts GoPro mounting style compatible accessories
- Out-front mounting position centers the computer and accessories in front of the stem
- Fits both 25.4mm and 31.8mm handlebars with included adapter
$19.99
- Discreet way to install an Apple AirTag inside your tubeless tire
- Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval
- AirTag is housed in a 3-part silicone and rubber tubeless valve mount
- Sacrificial stem, ensures tracker and rim protection under impact
- Silicone top cover protects tracker and internal plug reduces sealant ingress
- Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal
- Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types:
- MTB tyres (XC, Enduro Trail, Downhill)
- Gravel Tires (the narrowest recommended tyre size is 38mm wide)
$44.99
- Discreet way to install an Apple AirTag inside your tubeless tire
- Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval
- AirTag is housed in a 3-part silicone and rubber tubeless valve mount
- Sacrificial stem, ensures tracker and rim protection under impact
- Silicone top cover protects tracker and internal plug reduces sealant ingress
- Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal
Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types:
- MTB tyres (XC, Enduro Trail, Downhill)
- Gravel Tires (the narrowest recommended tyre size is 38mm wide)
$19.99
- Superlight computer/light mount fits cleanly underneath the stem
- Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer
- 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter
$37.99
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles.
- Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media
- SM clamp easily mounts or dismounts from the handlebar or tube
- Spring-loaded clamp system is simple to use and securely holds your device in place
- Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system
- Can mount to your repair stand so you can easily reference the Internet when working on your bike
$5.00
Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.
$40.00
Designed to specifically work with the MSW Double Wireless Cycle Computer, this sensor receives both speed and cadence information and is digitally coded to eliminate electronic interference from other devices.
- Strong 2.4 GHz signal allows rear chainstay mounting with fast and reliable transfer of information to the head unit
- Includes mounting hardware and shims to fit various diameter and shapes of tubing
- Sensor must be paired with specific MSW Double Wireless head unit
- 24g